TLE92466ED ESP32-C6 Examples

This directory contains comprehensive examples demonstrating the TLE92466ED driver on ESP32-C6 platform.

🎯 Overview

The ESP32-C6 examples showcase real-world usage of the TLE92466ED six-channel low-side solenoid driver with:

  • Hardware-specific HAL implementation for ESP32-C6
  • Multiple example applications covering different use cases
  • Automated build system with configurable app types
  • Comprehensive documentation for each example
  • Production-ready code with proper error handling

🔧 Hardware Requirements

ESP32-C6 Development Board

  • ESP32-C6-DevKitC-1 or compatible
  • USB-C cable for programming and power

TLE92466ED Connections

TLE92466ED Pin ESP32-C6 GPIO Function
MOSI GPIO7 SPI Data Out
MISO GPIO2 SPI Data In
SCLK GPIO6 SPI Clock
CS GPIO10 Chip Select
VDD 3.3V Logic Supply
VBAT 12-24V Power Supply
GND GND Ground

Load Connections

Connect your solenoids/loads to the TLE92466ED output channels (OUT0-OUT5) with appropriate current ratings.

🚀 Quick Start

1. Prerequisites

```bash

Install ESP-IDF v5.5

curl -fsSL https://raw.githubusercontent.com/espressif/esp-idf/master/tools/install.sh | bash source ~/esp/esp-idf/export.sh

Verify installation

idf.py –version ```text

2. Setup Repository

```bash

Clone and setup

git clone –recursive https://github.com/n3b3x/hf-tle92466ed-driver.git cd hf-tle92466ed-driver/examples/esp32

Initialize build environment

./scripts/setup_repo.sh ```text

3. Build and Flash

```bash

Build basic usage example (default)

./scripts/build_app.sh basic_usage Release

Flash to ESP32-C6

./scripts/flash_app.sh basic_usage Release

Monitor output

idf.py monitor ```text

📱 Available Examples

🟢 Basic Examples

basic_usage

Single channel control demonstration

  • HAL initialization and driver setup
  • Basic current control (500mA)
  • Diagnostics reading
  • Error handling examples

bash ./scripts/build_app.sh basic_usage Debug ./scripts/flash_app.sh basic_usage Debug text

multi_channel

Independent control of all 6 channels

  • Sequential channel activation
  • Synchronized control
  • Current ramping
  • Performance monitoring

bash ./scripts/build_app.sh multi_channel Release ./scripts/flash_app.sh multi_channel Release text

🟡 Advanced Examples

parallel_mode

High-current parallel channel operation

  • Channel pairing (CH0/CH3, CH1/CH2, CH4/CH5)
  • 4A current control
  • Load balancing
  • Thermal management

diagnostics_test

Comprehensive fault detection

  • Overcurrent detection
  • Temperature monitoring
  • Open load detection
  • Short circuit detection
  • Real-time fault reporting

pwm_dither

Precision control with PWM and dither

  • Configurable PWM frequency
  • Dither amplitude control
  • Noise reduction techniques
  • Precision current shaping

🔵 Application Examples

automotive_demo

Automotive solenoid control

  • Transmission solenoid patterns
  • Fuel injector timing
  • Valve control with feedback
  • Safety interlocks

industrial_valve

Industrial valve control

  • Proportional valve control
  • Position feedback integration
  • Flow rate control
  • PID control implementation

🟠 Testing Examples

stress_test

Reliability and stress testing

  • Continuous operation testing
  • Thermal cycling
  • Communication error injection
  • Recovery mechanisms

calibration

Current calibration and accuracy

  • Current measurement calibration
  • Temperature compensation
  • Accuracy validation
  • Factory calibration routines

🛠️ Build System

App Configuration

All examples are configured in app_config.yml:

yaml apps: basic_usage: description: "Basic TLE92466ED usage example" source_file: "BasicUsageExample.cpp" category: "basic" idf_versions: ["release/v5.5"] build_types: ["Debug", "Release"] text

Build Commands

```bash

List available apps

python3 scripts/get_app_info.py list

Get app information

python3 scripts/get_app_info.py info basic_usage

Build specific app and type

./scripts/build_app.sh

Flash specific app

./scripts/flash_app.sh

Clean build

./scripts/build_app.sh --clean ```text

Build Types

  • Debug: Full debugging symbols, verbose logging, assertions
  • Release: Optimized for performance and size
  • RelWithDebInfo: Release with debug symbols
  • MinSizeRel: Optimized for minimum size

📊 Configuration

Hardware Configuration File

All hardware configuration is defined in main/TLE92466ED_Config.hpp. This is the actual configuration used by the HAL and examples.

Important: The app_config.yml file only contains application definitions and build configuration, NOT hardware settings.

SPI Configuration

Edit main/TLE92466ED_Config.hpp to change SPI pins:

```cpp struct SPIPins { static constexpr int MISO = 2; // GPIO2 - SPI MISO static constexpr int MOSI = 7; // GPIO7 - SPI MOSI static constexpr int SCLK = 6; // GPIO6 - SPI Clock static constexpr int CS = 10; // GPIO10 - Chip Select };

struct SPIParams { static constexpr int FREQUENCY = 1000000; // 1MHz static constexpr int MODE = 0; // SPI Mode 0 }; ```text

Current Limits

Defined in main/TLE92466ED_Config.hpp:

cpp struct CurrentLimits { static constexpr uint16_t SINGLE_CHANNEL_MAX = 2000; // 2A per channel static constexpr uint16_t PARALLEL_CHANNEL_MAX = 4000; // 4A parallel mode }; text

Hardware Specifications

Defined in main/TLE92466ED_Config.hpp:

```cpp struct SupplyVoltage { static constexpr float VBAT_MIN = 8.0f; // Minimum VBAT (V) static constexpr float VBAT_MAX = 28.0f; // Maximum VBAT (V) };

struct Temperature { static constexpr int JUNCTION_MAX = 150; // Maximum temp (°C) }; ```text

🔍 Debugging

Serial Monitor

```bash

Monitor with automatic port detection

idf.py monitor

Monitor specific port

idf.py monitor -p /dev/ttyUSB0

Monitor with filtering

idf.py monitor | grep “TLE92466ED” ```text

Log Levels

Set in sdkconfig or via menuconfig:

text CONFIG_LOG_DEFAULT_LEVEL_DEBUG=y # Debug level CONFIG_TLE92466ED_DEBUG_ENABLED=y # Driver debug text

Common Issues

  1. SPI Communication Errors
    • Check wiring connections
    • Verify power supply (VBAT 12-24V, VDD 3.3V)
    • Ensure proper grounding
  2. Current Control Issues
    • Verify load connections
    • Check current limits in configuration
    • Monitor diagnostics for faults
  3. Build Errors
    • Ensure ESP-IDF v5.5 is installed
    • Run ./scripts/setup_repo.sh
    • Check C++23 compiler support

📚 Documentation

Example Documentation

Each example has detailed documentation in docs/:

  • docs/README_BASIC_USAGE.md
  • docs/README_MULTI_CHANNEL.md
  • docs/README_PARALLEL_MODE.md
  • docs/README_DIAGNOSTICS.md
  • And more…

API Documentation

🧪 Testing

Unit Tests

```bash

Run all tests

./scripts/build_app.sh stress_test Debug ./scripts/flash_app.sh stress_test Debug ```text

Performance Testing

```bash

Performance monitoring

./scripts/build_app.sh multi_channel Release ./scripts/flash_app.sh multi_channel Release ```text

Continuous Integration

The examples are automatically tested in CI with:

  • Multiple ESP-IDF versions
  • Debug and Release builds
  • Hardware-in-the-loop testing

🤝 Contributing

  1. Adding New Examples
    • Create source file in main/
    • Add entry to app_config.yml
    • Create documentation in docs/
    • Test with both Debug and Release builds
  2. Modifying HAL
    • Update ESP32C6_HAL.hpp and ESP32C6_HAL.cpp
    • Ensure compatibility with all examples
    • Test SPI communication thoroughly
  3. Configuration Changes
    • Update app_config.yml for new settings
    • Modify sdkconfig for ESP32-C6 specific changes
    • Document changes in README

📄 License

This software is released into the Public Domain. You can use, modify, and distribute it freely without any restrictions.

🔗 Resources

Version: 2.0.0 Target: ESP32-C6 ESP-IDF: v5.5 Last Updated: 2025-10-21