Here is a list of all variables with links to the classes they belong to:
- i -
- i2c_port : hf_i2c_master_bus_config_t, hf_i2c_slave_config_t
- id : hf_can_message_t, hf_esp_can_filter_config_t
- id2 : hf_esp_can_filter_config_t
- IDE : anonymous_namespace{StmCan.cpp}::BxCanRxHeader, anonymous_namespace{StmCan.cpp}::BxCanTxHeader
- Identifier : anonymous_namespace{StmCan.cpp}::FdCanRxHeader, anonymous_namespace{StmCan.cpp}::FdCanTxHeader
- idle_level : EspPio::ChannelState, hf_pwm_channel_config_t
- idle_state : hf_pio_channel_config_t
- IdType : anonymous_namespace{StmCan.cpp}::FdCanFilterConfig, anonymous_namespace{StmCan.cpp}::FdCanRxHeader, anonymous_namespace{StmCan.cpp}::FdCanTxHeader
- in_use : EspPwm::TimerState
- initialization_state : hf_adc_diagnostics_t
- initialization_timestamp : hf_pwm_statistics_t, hf_spi_statistics_t, hf_uart_statistics_t
- initialized_ : BaseAdc, BaseCan, BaseGpio, BaseI2c, BaseNvs, BasePeriodicTimer, BasePio, BasePwm, BaseSpi, BaseTemperature, BaseUart, EspI2cBus, EspI2cDevice, EspPwm, EspSpiBus, EspSpiDevice, EspUart, StmI2cBus, StmLogger, StmSpiBus
- input_delay_ns : hf_spi_device_config_t
- instance : StmPeriodicTimer::DispatchEntry
- interrupt_callback_ : EspGpio
- interrupt_count : InterruptStatus
- interrupt_count_ : EspGpio
- interrupt_enabled_ : EspGpio
- interrupt_trigger_ : EspGpio
- interrupt_user_data_ : EspGpio
- interruptCount : hf_gpio_statistics_t
- interruptEnabled : hf_gpio_diagnostics_t
- interruptSupported : hf_gpio_diagnostics_t
- intr_priority : hf_esp_can_config_t, hf_i2c_master_bus_config_t, hf_i2c_slave_config_t, hf_rmt_receive_config_t, hf_rmt_transmit_config_t
- intr_type : hf_pwm_channel_config_t
- invert_output : hf_pwm_channel_config_t
- invert_rx : hf_uart_irda_config_t
- invert_signal : hf_rmt_transmit_config_t
- invert_tx : hf_uart_irda_config_t
- ip : hf_wifi_ip_info_t
- is_bonded : hf_bluetooth_device_info_t
- is_brs : hf_can_message_t
- is_bus_suspended : hf_spi_diagnostics_t
- is_busy : hf_pio_channel_statistics_t, hf_pio_channel_status_t
- is_canfd : hf_can_message_t
- is_configured : hf_pio_channel_statistics_t
- is_connected : hf_bluetooth_device_info_t
- is_critical : EspPwm::ChannelState, hf_pwm_channel_config_t
- is_dual_filter : hf_esp_can_filter_config_t
- is_enabled : InterruptStatus
- is_enabled_ : EspCan
- is_esi : hf_can_message_t
- is_extended : hf_can_message_t, hf_esp_can_filter_config_t
- is_healthy : hf_logger_diagnostics_t
- is_initialized : hf_logger_diagnostics_t, hf_pio_channel_status_t, hf_spi_diagnostics_t, hf_uart_diagnostics_t
- is_primary : hf_bluetooth_gatt_service_t
- is_receiving : hf_pio_channel_status_t, hf_uart_diagnostics_t
- is_recovering_ : EspCan
- is_rtr : hf_can_message_t
- is_self : hf_can_message_t
- is_ss : hf_can_message_t
- is_transmitting : hf_pio_channel_status_t, hf_uart_diagnostics_t
- is_valid : EspPwm::ValidationResult, hf_temp_reading_t
- is_valid_ : DigitalOutputGuard
- is_write : hf_i2c_transaction_buffer_t
- IsFilterMatchingFrame : anonymous_namespace{StmCan.cpp}::FdCanRxHeader
- isr_handler_added_ : EspGpio
1.10.0